Indian Forum for Water Adroit

VIC hydrological model- sample data

Diwan

  • *****
  • Thanked: 26 times
  • +12/-0
  • Be a learner or Teacher or helping to learn
    • View Profile
  • Institute : National Institute of Technology Karnataka, Surathkal
  • Programming language : C, R, Matlab
Re: VIC hydrological model- sample data
« Reply #15 on: January 14, 2017, 07:59:25 PM »
It looks the essential libraries are not installed in your machine.. update your machine and do it again
Research Scholar
Dept. of Applied Mechanics & Hydraulics
National Institute of Technology Karnataka
Surathkal Mangalore - 575025
 

nsalimian

  • ***
  • +0/-0
    • View Profile
  • Institute : Department of civil engineering- Isfahan University of Technology
  • Programming language : matlab
Re: VIC hydrological model- sample data
« Reply #16 on: January 22, 2017, 11:29:27 AM »
Hi
I could finally make the exe file for routing. now I have a problem with data preparation for vegetation parameter file. I want to use the global vegetation file from the VIC website. Can any one explain how I use it and how should I find the gridcel number for my basin?
Thank you inadvance
 

619neha

  • *
  • Thanked: 2 times
  • +0/-0
    • View Profile
  • Institute : IISc Bangalore
Re: VIC hydrological model- sample data
« Reply #17 on: December 12, 2017, 06:06:37 PM »
Hello Sir/Ma'am,

I was running the VIC routing model for Gandak basin in Nepal area from 1979 to 2006. I got the 64 flux files for the basin to run the routing model (input). But when I ran, it showed the error:

NDAY =        10227  NMONTHS =          336
 1  NEPAL                   5   1
 Routing station: NEPAL               
 searching catchment...
 Number of grid cells upstream of present station          35
 reading grid_UH...
 making grid UH...
 reading UH_S grid from file
 making convolution...
           1  of          35 : /home/neha/Stehekin/stehekin/My_Results/fluxez_28.25_85.50
 Error reading time-series data, insufficient data or missing input file/home/neha/Stehekin/stehekin/My_Results/fluxez_28.25_85.50
 writing data...
Note: The following floating-point exceptions are signalling: IEEE_INVALID_FLAG IEEE_UNDERFLOW_FLAG

What can be the reason for this error?
I have attached the flow direction, flow fraction and input files.

Thank you
« Last Edit: December 12, 2017, 06:12:54 PM by 619neha »
 

Diwan

  • *****
  • Thanked: 26 times
  • +12/-0
  • Be a learner or Teacher or helping to learn
    • View Profile
  • Institute : National Institute of Technology Karnataka, Surathkal
  • Programming language : C, R, Matlab
Re: VIC hydrological model- sample data
« Reply #18 on: December 13, 2017, 12:40:04 PM »
Hi
Pls Check the spelling in rout file... fluxez_ or fluxes_
Research Scholar
Dept. of Applied Mechanics & Hydraulics
National Institute of Technology Karnataka
Surathkal Mangalore - 575025
 

619neha

  • *
  • Thanked: 2 times
  • +0/-0
    • View Profile
  • Institute : IISc Bangalore
Re: VIC hydrological model- sample data
« Reply #19 on: December 27, 2017, 03:02:24 PM »
Thank you sir.
There was actually a problem in the format of the input file to the routing model (fluxez file).