Indian Forum for Water Adroit

VIC hydrological model- sample data

Diwan

  • *****
  • Thanked: 30 times
  • +12/-0
  • Be a learner or Teacher or helping to learn
    • View Profile
  • Institute : National Institute of Technology Karnataka, Surathkal
  • Programming language : Python, R, Matlab
Re: VIC hydrological model- sample data
« Reply #15 on: January 14, 2017, 07:59:25 PM »
It looks the essential libraries are not installed in your machine.. update your machine and do it again
Research Scholar
Dept. of Applied Mechanics & Hydraulics
National Institute of Technology Karnataka
Surathkal Mangalore - 575025
 

nsalimian

  • ***
  • +0/-0
    • View Profile
  • Institute : Department of civil engineering- Isfahan University of Technology
  • Programming language : matlab
Re: VIC hydrological model- sample data
« Reply #16 on: January 22, 2017, 11:29:27 AM »
Hi
I could finally make the exe file for routing. now I have a problem with data preparation for vegetation parameter file. I want to use the global vegetation file from the VIC website. Can any one explain how I use it and how should I find the gridcel number for my basin?
Thank you inadvance
 

619neha

  • *
  • Thanked: 2 times
  • +0/-0
    • View Profile
  • Institute : IISc Bangalore
Re: VIC hydrological model- sample data
« Reply #17 on: December 12, 2017, 06:06:37 PM »
Hello Sir/Ma'am,

I was running the VIC routing model for Gandak basin in Nepal area from 1979 to 2006. I got the 64 flux files for the basin to run the routing model (input). But when I ran, it showed the error:

NDAY =        10227  NMONTHS =          336
 1  NEPAL                   5   1
 Routing station: NEPAL               
 searching catchment...
 Number of grid cells upstream of present station          35
 reading grid_UH...
 making grid UH...
 reading UH_S grid from file
 making convolution...
           1  of          35 : /home/neha/Stehekin/stehekin/My_Results/fluxez_28.25_85.50
 Error reading time-series data, insufficient data or missing input file/home/neha/Stehekin/stehekin/My_Results/fluxez_28.25_85.50
 writing data...
Note: The following floating-point exceptions are signalling: IEEE_INVALID_FLAG IEEE_UNDERFLOW_FLAG

What can be the reason for this error?
I have attached the flow direction, flow fraction and input files.

Thank you
« Last Edit: December 12, 2017, 06:12:54 PM by 619neha »
 

Diwan

  • *****
  • Thanked: 30 times
  • +12/-0
  • Be a learner or Teacher or helping to learn
    • View Profile
  • Institute : National Institute of Technology Karnataka, Surathkal
  • Programming language : Python, R, Matlab
Re: VIC hydrological model- sample data
« Reply #18 on: December 13, 2017, 12:40:04 PM »
Hi
Pls Check the spelling in rout file... fluxez_ or fluxes_
Research Scholar
Dept. of Applied Mechanics & Hydraulics
National Institute of Technology Karnataka
Surathkal Mangalore - 575025
 

619neha

  • *
  • Thanked: 2 times
  • +0/-0
    • View Profile
  • Institute : IISc Bangalore
Re: VIC hydrological model- sample data
« Reply #19 on: December 27, 2017, 03:02:24 PM »
Thank you sir.
There was actually a problem in the format of the input file to the routing model (fluxez file).
 

Muhammad Riaz

  • *
  • +0/-0
    • View Profile
  • Institute : NARC
  • Programming language : R
Re: VIC hydrological model- sample data
« Reply #20 on: January 29, 2018, 11:52:52 PM »
Please help i want to run with sample data this is
Muhammad Riaz@MuhammadRiaz-PC ~
$ ls
VIC.zip  vic_model

Muhammad Riaz@MuhammadRiaz-PC ~
$ cd vic_model

Muhammad Riaz@MuhammadRiaz-PC ~/vic_model
$ cd run

Muhammad Riaz@MuhammadRiaz-PC ~/vic_model/run
$ ls
Global_param.1  vicNl  vicNl.exe

Muhammad Riaz@MuhammadRiaz-PC ~/vic_model/run
$ vicNl.exe -gGlobal_param
-bash: vicNl.exe: command not found
 

Diwan

  • *****
  • Thanked: 30 times
  • +12/-0
  • Be a learner or Teacher or helping to learn
    • View Profile
  • Institute : National Institute of Technology Karnataka, Surathkal
  • Programming language : Python, R, Matlab
Re: VIC hydrological model- sample data
« Reply #21 on: January 30, 2018, 12:27:55 AM »
Hi Riaz

Pls provide sufficient information while posting your query. You pls go through the VIC website for compiling the source code. You can also follow this thread http://wateradroit.com/forum/index.php/topic,205.0.html

Hope this will help you.
Research Scholar
Dept. of Applied Mechanics & Hydraulics
National Institute of Technology Karnataka
Surathkal Mangalore - 575025
 
The following users thanked this post: Muhammad Riaz

Muhammad Riaz

  • *
  • +0/-0
    • View Profile
  • Institute : NARC
  • Programming language : R
Re: VIC hydrological model- sample data
« Reply #22 on: January 30, 2018, 04:36:25 PM »
Hi everyone
is the input files are different for all version of VIC model.?
or
The format of input files including Global parameter file is same for all version
Regards
Riaz
 

Muhammad Riaz

  • *
  • +0/-0
    • View Profile
  • Institute : NARC
  • Programming language : R
Re: VIC hydrological model- sample data
« Reply #23 on: January 30, 2018, 07:13:03 PM »
Hi everyone
I have a 5771 grids data of 0.1 spatial and 24 hour temporal resolutions
To run the VIC model what should be the computational requirement?
I want to purchase a laptop please suggest specifications of laptop for VIC .
 

Muhammad Riaz

  • *
  • +0/-0
    • View Profile
  • Institute : NARC
  • Programming language : R
Re: VIC hydrological model- sample data
« Reply #24 on: February 01, 2018, 04:08:49 PM »
Hi Diwan
I am running the model on sample data but this error is occuring
 "global_param.STEHE" has been
  opened for reading.... skipping header
WARNING: Unrecognized option in the global parameter file:
        ORGANIC_FRACT is unknown - check your spelling
WARNING: Unrecognized option in the global parameter file:
        VEGPARAM_LAI is unknown - check your spelling
WARNING: Unrecognized option in the global parameter file:
        LAI_SRC is unknown - check your spelling
Model run-time error...
To run the model with FULL_ENERGY=FALSE, FROZEN_SOIL=FALSE, and QUICK_FLUX=TRUE,                                                                                                                 you must define exactly 1 soil thermal node.  Currently Nnodes is set to  3.
...now exiting to system...
 

Diwan

  • *****
  • Thanked: 30 times
  • +12/-0
  • Be a learner or Teacher or helping to learn
    • View Profile
  • Institute : National Institute of Technology Karnataka, Surathkal
  • Programming language : Python, R, Matlab
Re: VIC hydrological model- sample data
« Reply #25 on: February 01, 2018, 06:21:55 PM »
Hi
Explore the option carefully in the global parameter file. You need to specify atleast minimum required option to run the model according to your input parameter (Forcing, Soil parameter, Vegetation library and vegetation parameter) and mode of computation (Energy/water balance)
Research Scholar
Dept. of Applied Mechanics & Hydraulics
National Institute of Technology Karnataka
Surathkal Mangalore - 575025
 

Muhammad Riaz

  • *
  • +0/-0
    • View Profile
  • Institute : NARC
  • Programming language : R
Re: VIC hydrological model- sample data
« Reply #26 on: February 03, 2018, 08:09:20 PM »
Hi Diwan please help me I run the routing model but the model does not pic the ending words with 8 and model also change  the coordinates of VIC output fluxes
 making convolution...
           1  of          63 : ../output/fluxes_34.958_75.208
 ../output/fluxes_35.041_75.208 NOT FOUND, INSERTING ZEROS
 ../output/fluxes_35.124_75.208 NOT FOUND, INSERTING ZEROS
           4  of          63 : ../output/fluxes_35.208_75.208
 ../output/fluxes_34.958_75.124 NOT FOUND, INSERTING ZEROS
 ../output/fluxes_35.041_75.124 NOT FOUND, INSERTING ZEROS
 ../output/fluxes_35.124_75.124 NOT FOUND, INSERTING ZEROS
 ../output/fluxes_35.208_75.124 NOT FOUND, INSERTING ZEROS
 ../output/fluxes_35.291_75.124 NOT FOUND, INSERTING ZEROS
 ../output/fluxes_35.374_75.124 NOT FOUND, INSERTING ZEROS
 ../output/fluxes_34.874_75.041 NOT FOUND, INSERTING ZEROS
 ../output/fluxes_34.958_75.041 NOT FOUND, INSERTING ZEROS
 ../output/fluxes_35.041_75.041 NOT FOUND, INSERTING ZEROS
 ../output/fluxes_35.124_75.041 NOT FOUND, INSERTING ZEROS
 ../output/fluxes_35.208_75.041 NOT FOUND, INSERTING ZEROS
 ../output/fluxes_35.291_75.041 NOT FOUND, INSERTING ZEROS
 ../output/fluxes_35.374_75.041 NOT FOUND, INSERTING ZEROS
 ../output/fluxes_34.874_74.958 NOT FOUND, INSERTING ZEROS
          19  of          63 : ../output/fluxes_34.958_74.958
 ../output/fluxes_35.041_74.958 NOT FOUND, INSERTING ZEROS
 ../output/fluxes_35.124_74.958 NOT FOUND, INSERTING ZEROS
          22  of          63 : ../output/fluxes_35.208_74.958
 ../output/fluxes_35.291_74.958 NOT FOUND, INSERTING ZEROS
 ../output/fluxes_35.374_74.958 NOT FOUND, INSERTING ZEROS
          25  of          63 : ../output/fluxes_35.458_74.958
 ../output/fluxes_34.874_74.874 NOT FOUND, INSERTING ZEROS